Removing and replacing disk drives
Installing the new boot disk drive
To install the new boot disk drive:
!
CAUTION:
Do not install any other disk drives when installing the boot disk drive. These other disk drives will be installed later.
1.Attach an ESD wrist strap to the metal chassis of the computer and to your wrist.
2.Install the primary boot disk drive in Slot 0. This disk is labeled “Boot Disk - Slot 0.” See the following figure.
Caution: Install only the boot disk drive as shown in this figure.
Primary boot
disk drive
(Boot Disk - Slot 0)
4
0
5
1
6
2
7
3
3500_mir_bootonly.cdr
3.Disconnect the ESD wrist strap.
4.Continue with Booting up the system with the new boot disk drive on page 35.
34 Avaya CMS R12 Sun Enterprise 3500 Computer CMS Upgrade Express
