Copying and activating the customer’s administration and options

Activating customer options

The activate process can take from as little as a few minutes to as much as 1 to 2 hours to complete. The amount of time depends on the number of customer options, the number and size of the disk drives, the number of ACDs, and so on.

To activate the customer’s software options:

1.Enter:

cd /cdrom/cdrom0

2.Do one of the following:

If running the command locally at the console, enter:

./cvue_activate

Optionally, if running the command remotely on a dial-up line, enter: nohup ./cvue_activate tee /nohup.out

! CAUTION:

If the dial-up modem line is dropped after starting this command with nohup, reconnect to the system, but do not rerun this command. Use tail -f /nohup.outto view the progress of the command. When finished viewing the nohup.out file, press Del to break out of the command.

For On Site Personnel: If the upgrade is being supported by remote personnel (for example, CMS Provisioning), use the following command from the local console during the copy and activate process to view the upgrade log file and track the progress of the upgrade:

tail -f /var/log/cvuelog

When finished viewing the /var/log/cvuelog file, press Del to break out of the command.

54 Avaya CMS R12 Sun Enterprise 3500 Computer CMS Upgrade Express

Page 54
Image 54
Avaya 12 manual Activating customer options, Cvueactivate, Tail -f /var/log/cvuelog