Avaya 12 manual Checking the status of the boot disk drive, Opt/informix/bin/setenv

Removing and replacing disk drives

Verifying that the system recognizes the new boot disk drive

To verify that the system recognizes the new boot disk drive:

1.Enter: format

A message similar to the following is displayed:

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0.c0t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /sbus@X,0/SUNW,socal@d,10000/sf@0,0/ssd@w<WWN>,0

Specify disk (enter its number):

The message displays the boot disk drive.

2.Enter: 0

3.Enter: q

4.Continue with Checking the status of the boot disk drive on page 38.

Checking the status of the boot disk drive

To check the status of the boot disk drive:

1.Enter:

. /opt/informix/bin/setenv

2.Enter:

onstat -d egrep "On-Line"

A message similar to the following is displayed. If the boot disk is not on-line, escalate through normal channels.

Informix	Dynamic Server Version 9.40.UC1	-- On-Line -- Up
00:03:46	-- 78848 Kbytes

3.Continue with Checking the status of the tape drives on page 39.

38 Avaya CMS R12 Sun Enterprise 3500 Computer CMS Upgrade Express