Clock/Timer
M I C R O S Y S T E M M C M 1 3 8 D
iR
Setting the clock
1In Standby mode, press PROG/CLOCK button.
➜ The clock digits for the hours flash.
2Press ¡1 / 2™ to set the hours.
3Press PROG/CLOCK again.
➜ The clock digits for the minutes flash.
4Press ¡1 / 2™ to set the minutes.
5Press PROG/CLOCK to confirm the time.
Note:
– If the clock has not been set,
Setting the timer
●The system can be used as an alarm clock. CD or TUNER or DOCK can be set to switch on at a preset time. The clock time needs to be set first before the timer can be used.
●If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically.
1In standby or during playback, press TIMER on the remote control for more than 2 seconds.
2Press ¡1 / 2™ (or CD/TUNER/DOCK on the remote control) to select sound source.
3Press TIMER to confirm your desired source. ➜ The clock digits for the hours flash.
4Press ¡1 / 2™ to set the hours.
5Press TIMER again.
➜ The clock digits for the minutes flash.
6Press ¡1 / 2™ to set the minutes.
7Press TIMER to confirm the time. ➜ The timer is now set and actiated.
Notes:
-If source CD is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.
-If source DOCK is selected and no iPod is docked or no dock connection is made,TUNER will be selected automatically.
To activate and deactivate timer
●In standby or during playback, press
TIMER once.
➜ Display shows 
if activated, and disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used.
●Press SLEEP on the remote control repeatly to select
desired time before system shuts off.
➜Display shows SLEEP and series of time
options for selection: | , | , | , | , | , | ... |
●To deactivate, press SLEEP on the remote control once or more until “ 
“ is shown, or press STANDBY ON on the system or remote control.
English
15
