O

E

 

 

 

 

 

 

PEN / CLOS

 

STANDBY-ON

SOURCE

BAND

PROG/CLOCK

- VOLUME

+

TUNING

IMPORTANT:

Before you operate the system, complete the preparation procedures.

Switching the system on

In Active standby, or Eco standby, press STANDBY-ON(y on the remote control).

The system will switch to the last selected source.

Press SOURCE (CD, TUNER or DOCK on the remote control).

The system will switch to the selected source.

To switch the system to standby mode

Press STANDBY-ON(y on the remote control).

The clock is displayed.

To switch the system to Eco-power standby mode

Press and hold STANDBY-ON(y on the remote control) for more than 2 seconds. The clock is displayed.

Power-saving automatic standby

The power-saving feature automatically switches to Eco power standby 15 minutes after a CD playback has ended and no control is operated.

Note:

In the Eco power standby, no button, except SOURCE, and STANDBY-ONbuttons, can be activated.

Basic Functions

Adjusting volume and sound

1Press VOLUME – /+ to increase or decrease volume.

Display shows the volume level and a number from 0-32.

2Press DSC repeatedly to

select the desired sound effect:

VOLUME

JAZZ / POP / CLASSIC /

 

ROCK.

DBB DSC

3Press DBB (on the remote

control) to switch bass enhancement on or off. Display shows: DBB if the DBB is activated.

4Press MUTE on the remote control to stop sound play-back instantly.

Playback will continue without sound and the display shows MUTE.

To start sound playback you can:

press MUTE again;

adjust the volume controls;

change source.

English

11

Page 11
Image 11
Philips MCM138D Basic Functions, Switching the system on, Power-saving automatic standby, Adjusting volume and sound