Samsung ML-1200 Series Troubleshooting Error Messages, Waiting for the Demo button to be pressed

Troubleshooting Error Messages

Error Paper Data

Waiting for the Demo button to be pressed

While printing in the manual feed mode, the printer is waiting for the Demo button to be pressed.

•Press the Demo button on the control panel to start printing. You must press the button to print each page after loading paper into the manual input tray.

Error Paper Data

Door open

The printer front cover may be open.

• Check that the printer front cover door is closed properly.

Error Paper Data

Canceling a job or memory out

If your printer is canceling a job (see page 5.5), the Error light blinks. When cancellation is complete, the message will automatically clear. The printer memory may not be sufficient for the print job. The page being printed may have been too complex for the memory capacity of the printer. Press the Cancel/Reprint button to cancel the current job.

•Try to free up memory by removing any unnecessary fonts, macros, or any data currently in printer memory.

•Simplify the image or print at a lower resolution.

Error Paper Data Toner Save

LSU error

•Reset the printer by briefly turning the printer off and back on again.

•If the error persists, contact a service representative.

7.18 PROBLEM SOLVING