Samsung ML-1200 Series manual Selecting the Output Location, Printing to the Face-Down Output Tray

Selecting the Output Location

The printer has two output locations: the face-up output slot and the face-down output tray. You can select the output location by changing the position of the output lever on the front of the printer. To use the face-down output tray, be sure the output lever is in upper (normal) position. To use the face-up output slot, push the output lever down.

•If paper coming out of the face-down output tray has problems, such as excessive curl, try printing to the face-up output slot.

•To avoid paper jams, do not change the position of the output lever while printing.

Printing to the Face-Down Output Tray

The face-down output tray collects paper in face-downorder. To use, make sure the output lever is in the upper position. (If it is not, push it up)

The face-down output tray should be used for most print jobs and is recommended when printing large jobs.

Printing to the Face-Up Output Slot

The printer prints to the face-up output slot if open. Push the output lever down to open the slot. Paper will come out of the printer face-up.

Using the face-up output slot might improve output quality with the following:

•envelopes

•labels

•Transparency films

•paper heavier than 24 lb (90 g/m2)

4.4 PRINT MEDIA