Samsung ML-1200 Series manual Printing on Labels

Printing on Labels

Guidelines

•Only use labels recommended for laser printers.

•Verify that the labels’ adhesive material can tolerate a fusing temperature of 200°C (392°F) for 0.1 second.

•Make sure that there is no exposed adhesive material between the labels. Exposed areas can cause labels to peel off during printing, cause paper jams. Exposed adhesive can also cause damage to printer components.

•Do not feed a sheet of labels through the printer more than once. The adhesive backing is designed for one pass through the printer.

•Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.

1Load labels in the input tray with print side up.

Adjust the guide to fit the width of the labels.

2Push the output lever down.

3 To print on labels, configure the paper source, type and size in the software application. For details, see page 5.3.

Note: To prevent labels from sticking, do not let the printed label sheets stack up as they are printed out.

4.10 PRINT MEDIA