Concord Camera JD C3.1z3 manual Setting Light Metering Mode, Setting Auto Focus AF Mode

TAKING A PICTURE

SETTING LIGHT METERING MODE

You can choose the desired part of the image to use for measuring the brightness and determine the exposure.

Metering Mode	Description
Spot	Meters the light in the center area of the image. Use this mode when the subject is
	backlit or surrounded by strong light.
Matrix(default)	Metering the light in different zones. Use this mode when the lighting condition
	is complex. The camera can adjust the settings to correct exposure for the main
	subject by metering the position of the subject, the brightness, the direct light, and
	the backlighting etc.

To change Light Metering mode:

CAMERA MODE

PICTURE EFFECT

+– EV COMPENSATION ISO

METERING

AF AUTO FOCUS

RETURN SELECT

METERING

SPOT

MATRIX

RETURN OK SET

ENU

1.When ( ) Metering is highlighted, press to enter its submenu.

2.Press or repeatedly until the desired setting is highlighted.

3.Press the OK button to select the Metering Mode.

4.Press the MENU button to return to the picture-taking mode.

SETTING AUTO FOCUS (AF) MODE

The camera provides two AF modes to perform the Auto Focus function.

AF Mode	Description
Spot	In this mode, the camera uses the center zone of the subject to perform auto
	focusing. Use this mode when you want to focus only what you aim at.
Multi-Area (default)	In this mode, the camera automatically determines which area (center,
	upper-left, upper-right, lower-left, lower-right) is best to perform the auto
	focusing function. Use this mode when the lighting condition is complex.
To set AF mode:
				AUTO-FOCUS
		CAMERA MODE	AF

	PICTURE EFFECT		SPOT
+–	EV COMPENSATION		MULTI-AREA
	ISO
	METERING
AF	AUTO FOCUS
	RETURN	SELECT	RETURN

OK SET

1.When AF mode is highlighted, press to enter its submenu.

2.Press or repeatedly until the desired setting is highlighted.

3.Press the OK button to select the AF Mode.

4.Press the MENU button to return to picture taking mode.

24