|
|
|
|
|
|
|
| Via TFTP Server |
| This is the IP address of the configured TFTP server. If selected and it is |
| ||
|
|
| ||||
|
|
| or not blank, the GXW40XX retrieves the new configuration file or new code image |
| ||
|
|
| from the specified TFTP server at boot time. After 5 attempts, the system will |
| ||
|
|
| timeout and then it will start the boot process using the existing code image in the |
| ||
|
|
| Flash memory. If a TFTP server is configured and a new code image is retrieved, |
| ||
|
|
| the new downloaded image is saved into the Flash memory. |
|
|
|
|
|
| Note: Do NOT interrupt the firmware upgrade process (especially the power |
| ||
|
|
| supply) as this will damage the device. Depending on the network environment |
| ||
|
|
| this process may take up to 15 or 20 minutes. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Via HTTP or HTTPS Server |
| The URL for the HTTP server used for firmware upgrade and configuration via |
| ||
|
|
| HTTP. |
|
|
|
|
|
| Note: If Auto Upgrade is set to No, GXW40XX will only do HTTP download once at |
| ||
|
|
| boot up. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Firmware Server Path |
| IP address or domain name of firmware server. That URL of the server that hosts the |
| ||
|
|
| firmware release. The default server is: fm.grandstream.com/gs |
|
| |
|
|
|
|
|
|
|
|
|
|
| |||
| Config Server Path |
| IP address or domain name of configuration server. The server hosts a copy of the |
| ||
|
|
| configuration file to be installed on the gateway. The default server is: |
| ||
|
|
| fm.grandstream.com/gs |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| XML Config File Password |
| The password used for encrypting the XML configuration file using OpenSSL. |
| ||
|
|
| This is required for the phone to decrypt the encrypted XML configuration file. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HTTP/HTTPS User Name |
| The user name for the HTTP/HTTPS server. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HTTP/HTTPS Password |
| The password for the HTTP/HTTPS server. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Firmware File Prefix |
| Default is blank. If configured, GXW40XX will request firmware file with the prefix. |
| ||
|
|
| This setting is useful for Internet Telephone Service Providers. End users should |
| ||
|
|
| keep it blank. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Firmware File Postfix |
| Default is blank. This setting is useful for Internet Telephone Service Providers. End |
| ||
|
|
| users should keep it blank. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Config File Prefix |
| Default is blank. This setting is useful for Internet Telephone Service Providers. End |
| ||
|
|
| users should keep it blank. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Config File Postfix |
| Default is blank. This setting is useful for Internet Telephone Service Providers. End |
| ||
|
|
| users should keep it blank. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Allow DHCP Option 66 to |
| If set to “Yes”, configuration and upgrade server’s information can be obtained using |
| ||
| override server |
| DHCP option 66 from DHCP server. This option specifies the URL of the tftp server. |
| ||
|
|
| Note: If DHCP Option 66 is enabled, the gateway will attempt downloading a |
| ||
|
|
| configuration file from the server URL provided by DHCP, even though Config |
| ||
|
|
| Server Path is left blank. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Automatic Upgrade |
| Choose “Yes” to enable automatic upgrade and provisioning. | When set to No, |
| |
|
|
| GXW40XX will only do upgrade once at boot up. |
|
|
|
|
|
| When “Check every day” or “Check every week” is checked, user can specify “Hour |
| ||
|
|
| of the day |
| ||
|
|
| There are three options to choose from: “Always check for New Firmware at Boot |
| ||
|
|
| up”, “Check New Firmware only when F/W pre/suffix changes”, and “Always Skip the |
| ||
|
|
| Firmware Check”. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Authenticate Conf File |
| If set to Yes, configuration file is authenticated before being accepted. This protects |
| ||
|
|
| the configuration from unauthorized modifications. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Grandstream Networks, Inc. |
| GXW40XX User Manual |
| Page 24 of 38 | |
|
|
| Firmware 1.0.4.2 | Last Updated: 06/2011 | ||
