Grandstream Networks Connect Your GXW40XX Gateway, Equipment Packaging, Connect the GXW40XX

CONNECT YOUR GXW40XX GATEWAY

Connecting the GXW40XX gateway is easy. Before you begin, please verify the contents of the GXW40XX package.

EQUIPMENT PACKAGING

Unpack and check all accessories. Equipment includes:

•one device unit

•one RJ45 Ethernet cable

•one 12V universal power adapter

CONNECT THE GXW40XX

Follow these four (4) steps to connect your GXW40XX gateway to the Internet and access the unit’s configuration pages.

1.Connect standard touch-tone analog phones to the FXS ports.

2.Insert an RJ45 Ethernet cable into the WAN port of GXW400X and connect the other end to an uplink port (a router or a modem, etc.) Note: If the gateway is used in router mode, connect a PC to the LAN port of GXW400X for initial configuration. In case of GXW4024, there is only one Ethernet port.

3.Plug the power adapter into the GXW40XX gateway into a power outlet.

Follow the instructions from the topic “Configuring GXW 400X with Web Browser” for initial configuration. The GUI pages will guide you through the remaining steps to set-up your gateway. Examples of the GUI Interfaces can be downloaded from: http://www.grandstream.com/products/gxw_series/gxw40xx/documents/gxw40xx_gui.zip.

FIGURE 1: DIAGRAM OF GXW4004-8AND GXW4024 BACK PANEL

GXW 400x

			PSTN
Reset	Power			FXS
		Console
LAN/WAN	Supply	Connection	Line	Ports
RJ-45 Ethernet		(PC
Ports		connection)

GXW 4024

Grandstream Networks, Inc.	GXW40XX User Manual	Page 5 of 38
	Firmware 1.0.4.2	Last Updated: 06/2011