![](/images/new-backgrounds/1267963/26796343x1.webp)
|
|
|
|
|
| Reply to ICMP on WAN port |
| If set to “Yes”, the GXW40XX will respond to the PING. Default is No. |
|
|
|
| ||
|
|
| “Yes” setting may make the gateway vulnerable to a Denial of Service attack. |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| WAN side HTTP/Telnet |
| If set to “Yes”, user can access the configuration page through the WAN port, |
|
| Access |
| instead of through the “PC” port. WARNING: this configuration is less secure than |
|
|
|
| default option. Default is No. |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| Cloned WAN MAC Address |
| This allows you to change/set the MAC address on the WAN interface. |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| Enable LAN DHCP |
| Default is Yes. |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| LAN Subnet Mask |
| Sets the LAN subnet mask. Default value is 255.255.255.0 |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| LAN DHCP Base IP |
| Base IP for the LAN port which functions as a Gateway for the subnet. |
|
|
|
| Default value is 192.168.2.1. |
|
|
|
| When the device detects WAN IP is conflicting with LAN IP, the LAN base IP |
|
|
|
| address will be changed based on the network mask |
|
|
|
| increased by 1. For example; 192.168.2.1 will be changed to 192.168.3.1 if net |
|
|
|
| mask is 255.255.255.0. Then the device will reboot |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| LAN DHCP Start IP |
| Default is 100 |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| LAN DHCP End IP |
| Default is 199 |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| DHCP IP Lease Time |
| Value is set in units of hours. Default value is 120 hrs (5 Days.) The time IP |
|
|
|
| address is assigned to the LAN clients. |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| DMZ IP |
| Forward all WAN IP traffic to a specific IP address if no matching port is used by |
|
|
|
| GXW40XX or defined in port forwarding. |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
|
|
|
|
|
| Port Forwarding |
| Forwards a matching (TCP/UDP) port to a specific LAN IP address with a specific |
|
|
|
| (TCP/UDP) port. |
|
|
|
| Note: This option is not present on GXW4024 |
|
|
|
|
|
|
In addition to the Basic Settings configuration page, end users also has access to the Device Status page.
TABLE 8: STATUS PAGE
| MAC Address |
| The device ID in hexadecimal format. This is needed for Internet Service Provider |
| ||
|
|
|
| troubleshooting. Note: there are separate MAC addresses for the WAN side and |
| |
|
|
|
| the LAN side. The LAN MAC address will be used for provisioning and can be found |
| |
|
|
|
| on the label on original box and on the label located on the bottom panel of the device. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| WAN IP Address |
| Shows WAN IP address of GXW40XX |
|
| |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Product Model |
| Contains the product model info. |
|
| |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
| ||
| Software Version |
| Program: This is the main software release. Boot and Loader are not changed often. |
| ||
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
| System Up Time |
| Shows system uptime since the last reboot. |
|
| |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Grandstream Networks, Inc. | GXW40XX User Manual | Page 22 of 38 | ||
|
|
|
| Firmware 1.0.4.2 | Last Updated: 06/2011 |