|
|
|
|
|
| Hunting Group |
| This feature enables the gateway to register all existing FXS ports with the same |
|
|
|
| ||
|
|
| phone number. Each incoming call will be routed to first available port in round robin |
|
|
|
| mode. User may configure all ports as members of the same Hunting Group or it may |
|
|
|
| configure different port combinations for more than one Hunting Group. |
|
|
|
| For example: Ports 1, 3 and 5 are members of the same Hunting Group, the rest of |
|
|
|
| the ports may have separate numbers and may be reached independently. |
|
|
|
| Any port, member of a Hunting Group that is not registered with a SIP account, will be |
|
|
|
| able to place outbound calls using the SIP credentials of the primary Hunting Group |
|
|
|
| port. |
|
|
|
| For example: Port 1, 3 and 5 are members of the same Hunting Group. Port 1 is |
|
|
|
| registered with a SIP account. Ports 3 and 5 are not registered. Ports 3 and 5 will be |
|
|
|
| able to place outbound calls using the SIP account of port 1. |
|
|
|
| Select appropriate value for Hunting Group feature. The original SIP account should |
|
|
|
| be set to Active while the group members should be set to the port number of the |
|
|
|
| Active Port. |
|
|
|
| Example configuration of a multiple Hunting group: |
|
|
|
| FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active" |
|
|
|
| FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "1" |
|
|
|
| FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1" |
|
|
|
| FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "Active" |
|
|
|
| FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "4" |
|
|
|
| FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "4" |
|
|
|
| FXS Port #7: SIP UserID and Authenticate ID entered, Hunting group set to "Active" |
|
|
|
| FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "7" |
|
|
|
| Hunting Group 1 contains ports 1, 2, 3. Hunting Group 4 contains ports 4, 5, 6. |
|
|
|
| Hunting Group 7 contains ports 7, 8. |
|
|
|
|
|
|
|
|
|
|
|
| Port# |
| FXS Port Number |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Offhook |
| This feature allows you to automatically dial the number specified in this field as soon |
|
|
|
| ||
|
|
| as the port is offhooked, i.e. when the receiver on the phone connected to Port# is |
|
|
|
| picked up. |
|
|
|
|
|
|
|
|
|
|
|
| Map to FXO Port# |
| This is used only when peering with a Grandstream GXW410x. Default is 1, |
|
|
|
| ||
|
|
| Supported values are |
|
|
|
| port will be mapped to. |
|
|
|
|
|
|
|
|
|
|
|
| Map to FXO Gateway IP |
| This is used when peering with an FXO gateway of any brand. You have to |
|
|
|
| ||
|
|
| specifically mention the IP and sip port where the call will be sent to. |
|
|
|
|
|
|
|
|
|
|
|
| and Port |
| Sip port that will be annexed to the IP address above. |
|
|
|
| ||
|
|
|
|
|
Grandstream Networks, Inc. | GXW40XX User Manual | Page 28 of 38 |
| Firmware 1.0.4.2 | Last Updated: 06/2011 |
