Programming settings, Auto Menu, Hourglass symbol flashes

8.Press the button "Start/Quick Start" t to com- mence the programmed operations.

Programming settings

With this programme you can pre-select a specific starting time for cooking or grilling food. If you have correctly adjusted the settings, the appliance will automatically start at the set time.

Note:

The clock must be pre-set in order to be able to select the function "Pre-selections".

1.Select the desired microwave function (thawing, cooking or grilling):

For microwaving: Press the button "Microwave" i as required to select the required power level. Programme the cooking time with the rotary switch 4.

For grilling: Press the button "Grill" u as required to activate the Grill function.

Set the desired grilling time using the rotary switch 4.

For thawing: Press the button "Thaw by time" w. Set the desired thawing time using the rotary switch 4.

2.Press the button "Pre-selections" p. The LED indi-

cator 2 shows the programmed time, the hour

figure blinks and the hourglass symbol ap- pears in the LED indicator 2.

3.Turn the rotary switch 4 to programme in the hours.

4.Press the button "Pre-selections" p, now the minute-figures flash.

5.Turn the rotary switch 4 to programme in the minutes.

6.Press the button "Start/Quick Start"t. The hour-

glass symbol flashes. The LED indicator 2 changes back to a display of the time. The micro- wave oven starts the procedure at the program- med times automatically.

Example:

It is 12:30 a.m. You wish to heat your food at 12:45 a.m., automatically at 400 watts power for 10 minutes.

1.Press the button "Microwave" i six times to select the power level P400.

2.Using the rotary switch 4 set the time to 10 minutes.

3.Press the button "Pre-selections" p. The LED display shows the actual programmed time

(12:30), the Egg-Timer symbol appears and the hour-figures flash.

4.Press the button "Pre-selections" p again and, using the rotary switch 4, programme the minutes to ":45".

5.Press the button "Start/Quick Start“ t to com- mence the programmed process. The LED indi- cator 2 changes back to a display of the time.

The hourglass symbol flashes.

Auto Menu

For foods to be prepared in auto menu mode, it is not necessary to enter the cooking time or power setting. It is sufficient to give the type of food that is to be prepared together with the weight of this food.

For this, press the respective button on the key panel 0, on which the foodstuffs are depicted. Then, set the weight of the food item using the rotary switch 4.

Enter the weight of the food

The weight parameters are required to determine the necessary cooking time.

After you have pressed the appropriate symbol, in the LED indicator 2 appears a weight detail in grammes "g" and, for beverages, in "ml". Amend the respective details using the rotary switch 4. As soon as the correct number for the weight of the food you wish to cook appears, press the button