|
|
|
|
|
|
| Lifeline Mode |
| Life line feature ensures user can place/receive a PSTN call in an emergency |
| |
|
|
| |||
|
|
| situation. |
|
|
|
|
| 1. If set to “Auto”, in case of power loss or loss of SIP registration, the PSTN |
| |
|
|
| line will be seamlessly connected to analog phone connected to FXS port. |
| |
|
|
| 2. If set to “Always Connected” the PSTN line will be always connected to |
| |
|
|
| the phone connected to FXS port. VoIP calls will not be allowed in this |
| |
|
|
| configuration. |
|
|
|
|
| 3. If set to “Always Disconnected”, user can only place VoIP calls, |
| |
|
|
| regardless of any power loss and/or SIP registration problems. User will be |
| |
|
|
| unable to place/receive any PSTN calls. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Failover to FXO Gateway |
| This feature allows users to place an outbound PSTN call in case there is a loss of |
| |
|
|
| an active registration (SIP server unreachable) of all FXS profiles. If set to “YES”, |
| |
|
|
| when GXW40XX recognizes a loss of registration, all outgoing calls will be routed to |
| |
|
|
| an FXO gateway. |
|
|
|
|
| The use of this option presumes a configured GXW410x or another FXO gateway |
| |
|
|
| with an active PSTN line connection. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FXO Gateway |
| IP Address or URI of the FXO gateway. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| NTP server |
| URI or IP address of the NTP (Network Time Protocol) server. Used by the phone to |
| |
|
|
| synchronize the date and time. An extensive list of public NTP servers can be found |
| |
|
|
| at http://www.ntp.org |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Syslog Server |
| The IP address or URL of System log server. The server collects system log |
| |
|
|
| information from the device. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Syslog Level |
| Select the GXW40XX to report the log level. Default is NONE. The level is one of |
| |
|
|
| DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the |
| |
|
|
| following events: |
|
|
|
|
| 1. product model/version on boot up (INFO level) |
| |
|
|
| 2. NAT related info (INFO level) |
|
|
|
|
| 3. sent or received SIP message (DEBUG level) |
| |
|
|
| 4. SIP message summary (INFO level) |
|
|
|
|
| 5. inbound and outbound calls (INFO level) |
|
|
|
|
| 6. registration status change (INFO level) |
|
|
|
|
| 7. negotiated codec (INFO level) |
|
|
|
|
| 8. Ethernet link up (INFO level) |
|
|
|
|
| 9. SLIC chip exception (WARNING and ERROR levels) |
| |
|
|
| 10. memory exception (ERROR level) |
|
|
|
|
| The Syslog uses USER facility. In addition to standard Syslog payload, it contains |
| |
|
|
| the following components: |
|
|
|
|
| GS_LOG: [device MAC address][error code] error message |
|
|
|
|
| Example: May 19 02:40:38 192.168.1.14 GS_LOG: | [00:0b:82:00:a1:be][000] |
|
|
|
| Ethernet link is up |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Primary RADIUS Server |
| IP Address or FQDN of the primary RADIUS Server |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Primary RADIUS Auth Port |
| Primary Radius server authentication port. Default value is 1812 |
| |
|
|
|
|
|
|
|
|
|
| ||
| Primary RADIUS Acct Port |
| Primary Radius server accounting port. Default value is 1813 |
| |
|
|
|
|
|
|
|
|
|
| ||
| Primary Radius Server |
| Special secret string should be preconfigured according to RADIUS Server |
| |
| Secret |
| configuration |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Secondary RADIUS Server |
| IP Address or FQDN of the secondary RADIUS Server |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Grandstream Networks, Inc. |
| GXW40XX User Manual | Page 26 of 38 | |
|
|
| Firmware 1.0.4.2 | Last Updated: 06/2011 | |
