Grizzly T10010 Service, Troubleshooting, Motor and Electrical, Symptom, Possible Cause, Solution

SECTION 7: SERVICE

Troubleshooting

Motor and Electrical

Symptom	Possible Cause		Solution
Motor will not start;	1.	Disabling key is at fault.	1.	Install/replace disabling
fuses or circuit				key; replace switch.
breakers blow	2.	Open circuit in motor or loose	2.	Inspect/repair all lead con-
		connections.		nections on motor for loose
				or open connections.
	3.	Start capacitor is at fault.	3.	Replace start capacitor.
	4.	Short circuit in motor or loose	4.	Inspect all connections on
		connections.		motor for loose or shorted
				terminals or worn insula-
				tion.
	5.	Incorrect fuses or circuit	5.	Install correct fuses or cir-
		breakers in power supply.		cuit breakers.
Motor slows, stops,	1.	Motor overloaded.	1.	Reduce load on motor.
or will not start;	2.	Short circuit in motor or loose	2.	Inspect connections on
fuses or circuit		connections.		motor for loose or shorted
breakers blow.				terminals or worn insula-
				tion.

-20- Model T10010 Wet Grinder