4.0 OPERATION

Reminders and Indicators (continued)

Low-Voltage Indicator

A voltage between 10 and 35 volts (10 and 64.9 volts for 48-volt systems) can be specified to activate the low-voltage alarm. When the battery voltage

falls below this level, the voltage indicator ( V ) flashes approximately once every four seconds.

To configure this alarm:

1.Press and hold the SELECT button until the dSF message is displayed, then release.

2.Press and release the SELECT button until the bLO message is displayed in the LED display.

3.Press and release the SELECT and RESET button together.

4.Press the RESET button until the desired voltage level is displayed.

5.Press the SELECT button to accept this value.

6.Press the SELECT button to return to the metering mode.

Step 1 = dSF

Step 2 = bLO

Step 4 = value

dSF

1

 

 

2

 

 

5

 

 

6

3

4

 

 

Figure 4-5

 

 

Low Voltage Indicator

© 2001 Xantrex Technology Inc.

31

P/N 973-0012-01-02 Rev. A 05/01

 

Page 36 Page 38
Page 37
Image 37
Xantrex Technology TM500A manual Reminders and Indicators Low-Voltage Indicator, To configure this alarm
Page 36 Page 38

TM500A specifications

Xantrex Technology is renowned for its innovative power solutions, and the TM500A is a standout model in its extensive product lineup. This advanced power inverter is engineered to meet the needs of both industrial applications and residential systems, providing users with reliable and efficient power conversion.

One of the main features of the TM500A is its advanced inverter technology, which allows for high efficiency and performance. With an efficiency rating often exceeding 90%, the TM500A minimizes energy loss during the conversion process. This makes it an ideal choice for renewable energy systems, such as solar and wind, by maximizing the amount of usable power delivered to connected devices. The inverter is capable of converting DC power into high-quality AC power, suitable for a wide range of appliances and electronics.

The TM500A is designed with versatility in mind. It supports various input voltage systems, allowing it to be used in a multitude of setups. This flexibility is further enhanced by its ability to operate in both grid-tied and off-grid configurations, opening up possibilities for diverse applications. Whether in a residential setting powering home appliances or in industrial applications supporting heavy machinery, the TM500A adapts to customer needs.

Another characteristic that sets the TM500A apart is its robust safety features. This inverter is equipped with multiple layers of protection, including overload, short circuit, and over-temperature safeguards. These safety measures ensure that both the device and the connected load are protected from potential damage, providing peace of mind to users.

The TM500A also boasts user-friendly interfaces, including LED indicators and diagnostic features that make monitoring performance straightforward. This ease of use is complemented by a compact and lightweight design, making installation and integration into existing systems straightforward.

Finally, Xantrex's commitment to quality is evident in the TM500A's construction, which utilizes durable materials suitable for demanding environments. Overall, the Xantrex TM500A stands as a reliable, efficient, and versatile power conversion solution that meets the evolving demands of users across various sectors. Its combination of advanced technology, safety, and user-centric design makes it a top choice for anyone needing dependable power solutions.
Top Page Image Contents