Table of Contents |
|
1.0 INTRODUCTION | 1 |
The TM500A | 1 |
Unpacking and Inspection | 2 |
TM500A (12/24 Volt) | 2 |
TM500A - NS (12/24 Volt) | 2 |
TM48 (48 Volt) | 2 |
2.0 INSTALLATION | 3 |
Required Tools | 3 |
3 | |
Mounting | 3 |
Surface Mounting | 4 |
Flush Mounting | 6 |
Extended Length Installations | 8 |
Deltec™ Shunt | 9 |
Mounting/Wiring the Shunt | 9 |
Mounting Circuit Board to an Existing Shunt | 10 |
Connecting the Shunt Board | 11 |
3.0 CONFIGURATION | 12 |
Setup | 12 |
Restoring the Factory Defaults | 12 |
Setting Parameters | 13 |
Charge Efficiency % | 14 |
Setting the Charge Efficiency Factor | 14 |
Amp Hours Ah | 15 |
Setting the Amp Hours | 15 |
CHARGED Indicator Setup | 17 |
Trigger on Voltage Only | 17 |
Trigger on Voltage and Amperage | 19 |
Trigger on Voltage and Time | 21 |
Charger Considerations | 23 |
Relay Chargers | 23 |
Taper Chargers | 23 |
23 | |
24 | |
Configuring the | 24 |
© 2001 Xantrex Technology Inc. P/N
i