Ricoh IS300e operating instructions Print Scan operation error messages, 176

Appendix

Message		Possible Cause and Required Action
Exceeded max. scan pages. To	•	Continued scanning and reached the max-
scan remaining pages as a new		imum scan limit (100 pages). Press [Exit].
job, press [Exit]		The scanned original is sent. The specified
then press the Start key.		destination and scanning condition set-
		tings remain the same even after you have
[Exit]
		pressed [Exit]. Place the next original and
		press the {Start} key.

Print Scan operation error messages

			Message				Possible Cause and Required Action
		Printer	is	offline.		•	The printer you have selected for printing is currently
		Check the printer.					offline. Press the {Online} key on the printer to make it
		[Exit]					online. Press [Exit] to start printing.
		The printer is current-				•	The printer is currently in use. Press [Exit] to cancel the
		ly in use. Cannot print.					print job (this discards the scan data), and try again lat-
		[Exit]					er.
		Selected printer is not				•	The printer is not compatible with this machine. Select
		supported.		Check	the		other printer that is supported for use with this ma-
		printer.					chine.
		[Exit]
		No response from the				•	The printer is not responding. Check if the power of
		device. Check the power					the printer is turned on, and the cables are connected
		and cables.					correctly.
		[Exit]
		Warming up... Check the				•	The printer is not ready to print, because it is still
		printer.					warming up. Wait until the printer is ready.
		[Exit]
		Add paper to the print-				•	Take the necessary actions in accordance with the mes-
		er.					sage that is displayed. See the manual that comes with
		[Exit]					the printer for information about adding paper, replac-
							ing toner bottle, closing the cover of the printer, or
		Add Toner Replace Toner					clearing misfeeds.
		Bottle in the printer.
11
		[Exit]
		Cover	Open Check		the
		printer.
		[Exit]
		Paper Misfeed Check			the
		printer.
		[Exit]
		Functional		Problems		•	The printer has functional problems other than those
		Check the printer.					mentioned above. Check to make sure that the printer
	176	[Exit]					operates normally. See the manual that comes with the
							printer.