Ricoh IS300e Making Scan Settings, To recall a registered scan settings, Press Scan

Sending Scan File by E-mail

Making Scan Settings

Follow the steps below to configure scan settings before you perform a Send Scan operation. If you skip the following steps, scan is performed us- ing the settings that you have config- ured and registered to [Default] in [4.Scan Settings] under the Scanner Features menu.

A Press [Scan].

The Scan Settings screen is dis- played.

6B Select whether you configure the scan settings manually, or use one of the user settings you have reg- istered.

Reference

You can confirm the scan set- tings you have registered. See p.133 “Confirming the Scan Set- tings”.

Note

❒Press [Cancel] if you want to use the settings you have registered to [Default].

❒You cannot edit and save the settings that you have regis- tered to [User 1], [User 2] and [Us- er 3] here. If you want to use one of the user settings while chang- ing some of them, recall the user

setting you want to use by high- lighting it and pressing [OK] first. And then, change the set-

132tings by selecting [Manual].

To recall a registered scan settings

A Use the {1} or {0} key to highlight [User 1], [User 2] or [User 3] on the screen, and then press [OK].

This returns to the E-mail/Send File standby screen, and the cor- responding scan settings are displayed on the third line of the screen.

To configure scan settings manually

A Use the {1} or {0} key to highlight [Manual] on the screen, and then press [Set- tings].

The first page of the Scan Set- tings screen ( Scan Settings 1/3) is displayed.

B Use [Next] or [Prev.] to scroll through the pages, use the {1} or {0} key to highlight the set- up item you want to change, and then press [Settings].

Reference

See p.70 “Information to Reg- ister in [Send Scan Set - tings]” for details about each of the setup items.