Ricoh IS300e operating instructions Press PrevMenu, Press Exit

Configuring the Scanner Settings

L Press [OK].

The sett ing screen for “ 4 . Date/Time(Year/Month/Day/Hr /Min/Sec) ” appears.

M Use the {1} and {0} keys and

3 the number keys to adjust the cur- rent date and time.

Note

❒The internal clock starts work- ing from the adjusted time when you press [OK].

❒To correct the number that is

currently highlighted, press the {Clear/Stop} key to clear the number you have entered, and then input the correct number.

N Press [OK].

This returns to the Send Scan Set- tings menu.

Note

❒Pressing [Cancel] discards the adjusted time value, and re- turns to the previous screen.

O By pressing [Next] to display “5. Compression (Black and White) ” through “14. ADF Thin Paper ” as the setup item, select options for each of them in the same way that you have done in the steps C through E.

After all, “15. Job Delivery Data Max. Setting ” appears as the setup item currently selected.

P Select the option you want for “15. Job Delivery Data Max. Set- ting ” in the same way that you have done in the steps G through I.

Q Press [PrevMenu].

This returns to the Scanner Fea- tures menu.

R Press [Exit].

This exits the Scanner Features menu, and returns to the standby screen that is displayed when you turn the power on.

Important

❒Never turn off the power of this machine before the standby screen is displayed. Doing so can discard all the settings you have configured, and return this machine to its factory default status.

Note

❒Instead of pressing [Exit], you can press a number key to enter another setting menu.

66