Ricoh IS300e Communication Mode, Channel, 189, Configuration → Basic Settings → Password

Using Wireless LAN

T Enter “scanner” for the user name, enter the password, and then click [OK].

Note

❒User name is fixed to “scanner”.

❒The initial factory default pass- word is “password”. You can

change the password using

[Configuration] → [Basic Settings] → [Password].

The setup screen appears.

U Click [Basic Settings], and then [TCP/IP] on the sub-menu.

V Make settings to each of the setup items on the screen.

Reference

⇒ p.52 “System Settings”

❖LAN Type

Switch between network inter- face board and wireless LAN (IEEE 802.11b) board. Be sure to set this item to “IEEE 802.11b”.

❖Network Boot

Select [DHCP] to use the DHCP server to make network settings automatically. When using DH- CP, the IP address, subnet mask, and default gateway ad- dress obtained from the DHCP server are used.

Select [NONE] to make network settings manually.

❖Communication Mode

Select the communication mode.

•Infrastructure mode

A method of communicating with other computers via an access point. The SSID must be the same as the one set for the access point.

•Ad hoc mode

A method of communicating with other computers, peer to peer, without an access point. The same communica- tion channel must be used for all computers.

•802.11 Ad hoc mode

A method of communicating with other computers, peer to peer, without an access point. The same communica- tion channel and SSID must be used for all computers.

❖SSID

Enter the SSID (Service Set Iden- tifier) you want to use, using up to 32 characters. The SSID cur- rently in use appears in paren- theses.

This information appears if [802.11 Ad hoc mode] or [Infra- structure mode] is selected in the [ Communication Mode ] list.

The SSID is an identifier used when connecting between an access point and a wireless LAN client. Only a wireless LAN cli- ent and an access point that have the same SSID can com- municate with each other.

❖Channel

If [802.11 Ad hoc mode] or [Ad hoc mode] is selected in the [Commu- nication Mode] list, select a com-

munication channel.11 The channel is a set radio fre- quency used for wireless LAN

(IEEE 802.11b). Computers us- ing the same channel can com- municate with each other.

189