Ricoh IS300e operating instructions Registering Print Settings, Original Size, Duplex

Registering Print Settings

Registering Print Settings

You can configure and register up to four sets of settings for printing scan data. Memory areas named " Default ", " User 1", " User 2", and " User 3" are available for registering Print Set- tings. You can easily recall the set- tings you have registered to " User 1",

"User 2", or " User 3", which means you don't have to configure detailed settings each time you print scan da- ta. Settings registered to " Default " apply when you print scan data with- out selecting " User 1", " User 2", or " User 3", or without manually config- uring Print Settings.

Information to Register in [Print Settings]

❖Scan Type

This item lets you specify the type of originals (text or photo) for black and white or gray scale scan- ning.

Note

❒The following options do not apply when you configure set- tings to perform scan with full colour.

•Text

Select this option for standard originals containing mainly text. With this option, scan is performed with black and white (halftoning is done by error dif- fusion).

•Text/Photo

Select this option for originals containing a mixture of text and photographs. By selecting this option, scan is performed with gray scale.

•Photo

Select this option for originals containing photographs and/or other pictures. By selecting op- tion, scan is performed with gray scale.

❖Image Density

Use this item to adjust density of 3

the image for scanning. You can se- lect one of seven steps from 1 (lightest) to 7 (darkest).

❖Original Size

Use this item to select the size of the originals to be scanned. You can select from the following op- tions.

Auto Detect, A3S, A4S, A4R, A5S, A5R, 11x17S, 81/2x14S, 81/2x13S, 81/2x11R, 81/2x11S, 51/2x81/2R, 51/2x81/2S, B4JISS, B5JISS, B5JISR, Custom size

•The original sizes available for the [Auto Detect] function change depending on where you place the originals (on the exposure glass or on the ADF). See p.110 “The Original Sizes Available for Auto Detection” for details.

•When you select [Custom Size], you can specify the dimensions of the scan area (width and height).

❖Duplex

Use this item to select a type of du- plex prints.

• (1 Sided Orig. → 1 Sided Print)

Scans a single-sided original and prints onto a single-sided page.

79