Ricoh IS300e Setting Up the Optional Accessories, Installing the Image Processing Unit

Setting Up the Scanner

Setting Up the Optional Accessories

Installing the Image

Processing Unit

2Important

❒Before touching the Image Process- ing Unit, be sure to touch any metal object in order to discharge static electricity from you body.

Note

❒Use the tool that comes with this machine when you tighten or loos- en the screws.

A Turn off the power of this ma- chine, and unplug all the cables connected to this machine includ- ing the power cord.

B Remove the four screws at the bottom of the rear panel of this machine.

ABK012S

C Pull out the scanner control unit.

ADG003S

Important

❒The scanner control unit is very heavy. Be careful not to drop it when removing.

D Insert the connector located on the back of the Image Processing Unit to the socket on the scanner control unit, and then secure the Image Processing Unit using the screw that comes with it.

ADG023S

E Confirm that the Image Process- ing Unit is securely fastened, and make sure that there is no foreign objects on the scanner control unit.

F Replace the scanner control unit into the scanner unit, and then se- cure it with the four screws.

28