Ricoh IS300e operating instructions Connecting to a Network

Setting Up the Scanner

Connecting to a Network

This section explains how to connect this machine to a network.

Important

❒Use a 100BASE-TX (category 5) or

2 10BASE-T network cable when you connect this machine to a net- work.

A With the network cable you use for connection, create a single loop about 15cm (6”)(A) away from an end of the cable, and then attach the ferrite core that comes with this machine as illustrated below.

Note

❒Skip this step when you use this machine in North America.

B Insert the network cable’s end that has the ferrite core into the network interface connector of this machine.

ADG004S

Note

❒When you use this machine in North America, insert an end of the network cable into the net- work interface connector of this machine.

C Insert the other end of the net- work cable into an appropriate connector of a network device, such as an Ethernet hub.

30