Ricoh IS300e operating instructions To recall shared folders using a title, 141

Sending a Scanned File to a Registered Shared Folder

To recall shared folders using a title

A Press the {./*} (Title) key.

List of titles appears on the screen.

Note

❒Titles are displayed accord-

ing to the settings in [Configu- ration] → [Basic Settings] → [Scanner] → [Select Title] on the Web Status Monitor.

B Use the {1} or {0} key to highlight the title you want to select, and then press [OK].

The shared folders assigned to the selected title are displayed.

Note

❒You can select the title under which each of the registered

destinations is assigned in

[Configuration] → [File Send Settings] → [File Send Path] → [Assign Title] on the Web Sta- tus Monitor.

C Highlight the shared folder name you want to select, and then press [Select].

This selects the check box next to the folder name.

To recall all available destinations

A Press the {./*} (Title) key.

List of titles appears on the screen.

B Use the {1} or {0} key to highlight [All], and then press [OK].

F Press [Exit].

The message “ Enter protection code for destination. ” ap-

pears.

G Enter the protection code using the number keys.

7

Note

❒Enter the four- through eight-

digit number that is specified in

[Configuration] → [File Send Set- tings] → [File Send Path] → [Pro- tected Password] on the Web Status Monitor.

H Press [OK].

This returns to the screen that was displayed in step C.

141