Ricoh IS300e operating instructions Checking the Scanner Location, Installation space

2. Setting Up the Scanner

This section explains how to setup the scanner to get it ready for use, and how to make necessary connections.

Checking the Scanner Location

Before setting up the scanner, take a few minutes to check the location where you are going to install the scanner.

RWARNING:

•Make sure the wall outlet is near the ma- chine and easily accessible so that in event of an emergency it can be un- plugged easily.

RCAUTION:

•Keep the machine away from humidity and dust. A fire or an electric shock might occur.

•Do not place the machine on an unstable or tilted surface. If it topples over, it could cause injury.

❖Installation space

Make sure that the scanner is in a location where there is enough space to provide the clearance as il- lustrated below, and also provide a comfortable working area in the front.

ADG020S

•Place the scanner on a level, stable, vibrating-free surface. Allowable inclination of the surface for instal- lation is within 5mm (0.2”) (when measuring difference of heights between an end and the other end of this machine, compared to a lev- el surface).

ADG021S

23