Ricoh IS300e operating instructions Sending Scan File by Scan to FTP, 149

8.Sending Scan File by Scan to FTP

This chapter explains procedures to send a scanned file to an FTP server.

Procedure Breakdown

The following overview diagram shows the flow of the steps for sending a scanned file to an FTP server that is registered to this machine. Note that the un- derlined steps are essential.

Note

❒Some of the steps such as making scan settings are identical to those ex- plained under “Sending Scan Files by E-mail”. See the relevant pages shown to the right of the following overview diagram.

Place originals in the ADF or on the exposure glass.

Select an FTP server.

Select a file name.

Make scan settings.

Press the {Start} key.

Confirm the transmission results by using the Web Sta-

tus Monitor.

⇒p.126 “Before Sending Scan Data”

⇒p.150 “Selecting an FTP Server”

⇒p.142 “Selecting a File Name”

⇒p.132 “Making Scan Settings”

⇒p.135 “Performing Scan Operation”

⇒p.137 “Checking Transmission Results”

149