Ricoh IS300e operating instructions Scan settings error messages, 173

	Troubleshooting
Scan settings error messages
Message	Possible Cause and Required Action
Cannot detect the scan size.	The original is not on the exposure glass, or it
Check whether the original is	is placed but the scan size cannot be automati-
set, then select the proper	cally detected.
size.	• If the original is not there, place it on the ex-
[Exit]	posure glass.
	• Because the scanner detects the scan size
	when the ADF is opened and closed, make
	sure you open the ADF to an angle of 30 de-
	grees or more.
	• Small size paper and some paper sizes may
	not be detected automatically. For details,
	see p.110 “The Original Sizes Available for
	Auto Detection” .

11

173