Ricoh IS300e operating instructions To recall all available destinations, 151

Selecting an FTP Server

B Use the {1} or {0} key to highlight the title you want to select, and then psress [OK].

The FTP servers assigned to the selected title are displayed.

Note

❒You can select the title under which each of the registered

destinations is assigned in

[Configuration] → [E-mail Set- tings] → [E-mail Address] → [Assign Title] on the Web Sta- tus Monitor.

C Highlight the FTP server name you want to select, and then press [Select].

This selects the check box next to the FTP server name.

To recall all available destinations

A Press the {./*} (Title) key.

List of titles appears on the screen.

B Use the {1} or {0} key to highlight [All], and then press [OK].

F Press [OK].

The message “ Enter protection code for destination. ” ap-

pears.

G Enter the protection code using the number keys.

Note

❒Enter the four- through eight-

digit number that is specified in

[Configuration] → [File Send Set- tings] → [FTP Server] → [Protect- ed Password] on the Web Status Monitor.

H Press [OK].

This returns to the screen that was displayed in step C.

I Press [OK].

This returns to the E-mail/Send File standby screen.

8

151