Ricoh IS300e Confirming the Print Settings, 165, When you are finished, press, PrevMenu

Printing Scan Data

Note

❒While the setting screen for

[Enlarge] or [Reduce] is dis- played, highlighting one of

the preset ratio displays pairs of "original size → copy pa- per size" on the third line of the screen.

H If you want to set a custom ra- tio for [Enlarge] or [Reduce], highlight the nearest preset ra- tio, press [Zoom], and then use the number keys (or [-]and [+] ) to specify the ratio.

Confirming the Print Settings

You can confirm the current print set- tings, or the print settings that you have registered to [Default], [User 1], [User 2] or [User 3].

Note

❒You can confirm the [Default] set- tings by selecting [Manual] in step B below, unless you configure the print settings manually. After you have manually configured the print settings, selecting [Manual] displays the current settings.

IPress [OK].

This saves the ratio you have entered, and returns to the sec- ond page of the Print Settings screen ( Print Settings 2/2).

Note

❒Pressing [Cancel] discards the setting you have entered, and returns to the previous screen.

JWhen you are finished, press

[PrevMenu].

This returns to the Print Settings screen.

KPress [OK].

This returns to the Print Scan standby screen, and the print settings are displayed on the third line of the screen.

A While the Print Scan standby screen is displayed, press [Print].

The Print Settings screen is dis- played.

B Use the {1} or {0} key to high- light [Manual], [User 1], [User 2] or [User 3] on the screen, and then press [Status].

The status screen of your selection appears.

C Use [Next] and [Prev.] to display the setting of the setup item you want to confirm.

10

D When you are finished, press [Ex- it].

165