Ricoh IS300e operating instructions Image Density appears as the setup item currently selected

Registering Scan Settings

B Use the {1} and {0} keys to highlight the item you want to input, and then use the number keys to input the val- ue.

Note

❒To correct the number you have entered, use the {1} and {0} keys to highlight it, and then press the {Clear / S t o p } key to clear the number.

❒You can also use the {#} key as well as the {1} and {0} keys to move selection.

CPress [OK].

This saves the setting you have entered, and returns to the De- fault Scan Settings menu.

Note

❒Pressing [Cancel] discards the values you have entered, and returns to the Default Scan Settings menu.

M Press [Next].

“4. Image Density ” appears as the setup item currently selected.

N Press [OK].

The setting screen for “4. Image Density ” appears.

O Use the {1} and {0} keys to

highlight the setting you want.

P Press [OK].
This saves the setting you have se-
lected, and returns to the Default	3
Scan Settings menu.

Note

❒Pressing [Cancel] discards the selected setting, and returns to the Default Scan Settings menu.

Q By pressing [Next] to display “5. Erase Colour ” through “11. Orig- inal Settings ” as the setup item, select options for each of them in the same way that you have done in steps D through G.

R After all the settings are the way you want, press [PrevMenu].

This registers the Scan Settings you have configured to the “ Default ” memory area, and returns to the Scan Settings menu.

S While the Scan Settings menu is displayed, press {2}, {3} or {4} key to display a corresponding User Scan Settings menu.

For example, press the {2} key to display the User 1 Scan Settings menu.

77