Ricoh IS300e Specify the IP address of this machine, When you are finished, press OK

Configuring the Scanner Settings

C Specify the IP address of this machine.

•Input the IP address using the number keys.

•An IP address consists of four parts, and each part has

3	a number within the range of
	0 to 255. Make sure that you

input each part of the IP ad- dress in three digits. For ex- ample, when you want to specify “8” for a part, high- light the part and then input

“008 ” using the number

keys.

You can use {11} (or {#} ) and {0} keys to move the highlighting to right and left.

Note

❒You can use the {Clear/Stop} key to clear the three-digit number currently highlight- ed.

D When you are finished, press [OK].

This returns to the System Set- tings menu.

Note

❒Pressing [Cancel] discards the value that you have speci- fied, and returns to the previ- ous screen.

EPress [Next]

“3. Subnet Mask ” appears as the setup item currently select- ed.

FSpecify each value for “3. Sub- net Mask ”, “4. Default Gate- way Address ”, “5. Access Control ” and “6. Access Mask ” in the same way that you have done in steps B through

E.

“7. Network Boot ” appears as the setup item currently select- ed.

Note

❒When you want to set no lim- itation of access to this ma- chine, it is not necessary to specify “5. Access Control ”, while you need to confirm that “6. Access Mask ” is set to “000.000.000.000”.

GPress [OK].

The setting screen for “7. Net- work Boot ” appears.

HUse [↑] and [↓] to display “

NONE ”.

Note

❒“*” mark appears along with the option currently selected.

IWhile “NONE” is displayed, press [OK].

This returns to the System Set- tings menu.

Note

❒Pressing [Cancel] leaves the setting as it was (the option marked with “*” remains ac- tive), and returns to the pre- vious screen.

56