Ricoh IS300e operating instructions Cleaning, 180, Wipe off the scanner with a dry, soft cloth

Appendix

Cleaning

RWARNING:

•Never remove any covers or screws oth- er than those specified in this manual. The inside of the scanner contains high- voltage components that can cause elec- trical shock. Have all inspections, ad- justments, and repairs inside the scanner performed by an authorized dealer only.

•Do not attempt to modify this scanner in any way. Modification can cause fire orelectrical shock.

RCAUTION:

Cleaning the Exposure Glass,

ADF Exposure Glass, White

Sheet, and White Plate

RCAUTION:

•Be careful not to pinch your fingers when closing the Automatic Document Feeder (ADF).

A Turn off the power of the scanner and unplug the power cord from the outlet.

•When disconnecting the power cord, al- ways make sure to hold onto the plug. Do not pull on the power cord itself. This can cause damage to the cord, fire or electrical shock.

	We recommend periodically cleaning
	the scanner to ensure that it is in opti-
	mum operating condition. First, wipe
	off the scanner with a dry, soft cloth.
	Next, dampen a soft cloth with water,
	wring it out tightly, and then wipe off
	the scanner. Use a neutral detergent
	for exterior portions of the scanner
	where soiling cannot be removed
	with water alone. Wipe off the rubber
	rollers with ethyl alcohol, and then
	wipe with a cloth dampened with wa-
	ter. Finally, wipe off the rollers and
	exterior with a dry cloth to remove
	any excess moisture.
11
	Important

B Wipe off the scanner with a dry, soft cloth.

ADG017S

1.White Plate

2.White Sheet

3.ADF Exposure Glass

4.Exposure Glass

❒Do not use volatile chemicals such as benzene, paint thinner or spray with insecticides. This can cause deformation, discoloration and cracking.

❒Wipe off the Automatic Document Feeder (ADF) with a dry, clean cloth when there is dust or soiling present inside.

180