Ricoh IS300e Outline to Use Scan to E-mail, Configure 1.System Settings on this ma

Configuring the Scanner Settings

Outline to Use Scan to E-mail

The following overview diagram shows the preparation steps for sending scan files as e-mail attachments. Note that the underlined steps are essential.

Reference

There are three types of setup items: 1) items that you can configure settings using the control panel of this machine, 2) items that you can configure set- tings using a Web browser on a client computer, 3) items that you can config- ure settings using both of the above. See p.41 “Initial Scanner Setup” for

3 details. This manual covers only the setting procedures that you can perform using the control panel of this machine. For details about settings this manual does not cover, see the Web Status Monitor Help. For information about how to view the Web Status Monitor, see p.84 “Accessing the Scanner”

Configure [1.System Settings] on this ma-

chine

Configure [General Settings] on the Web Status

Monitor

Configure [2.SendScan Settings] and [4.Scan Settings] on this machine or on the Web Status Monitor

Configure [Custom Title] settings on the Web

Status Monitor.

Configure [E-mail], register [E-mail Address] and [Subject] on the Web Status Monitor

Recall the Settings on the Web Status Monitor

See p.52 “System Settings”

See the Web Status Monitor Help.

See p.59 “Scanner Settings”.

See the Web Status Monitor Help.

See p.88 “Configuring [E-mail Ad- dress]”

and p.91 “Information to register in [E-mail Address]”

See the Web Status Monitor Help for details about [E-mail]and [Subject].

See p.98 “Recalling the Settings” for details.

34