Appendix
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before detaching/attaching the stand
•Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
•Remove all terminal covers and connected cables.
•Lay the TV down on cushioning (such as a blanket) over a table.
•Make sure two or more people perform the operation.
CAUTION
• Do not
from the TV unless using an optional | it. |
1
Unfasten the in place.
NOTE
Screw driver (not supplied)
the stand
2
Stand post
1
1 Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)
2 Remove the stand post from the stand base and attach it to the TV.
• To attach the stand, perform the above steps in reverse order.
Handling and precautions with the wall-mounted TV
•You can mount the TV on the wall using the optional
•For details, refer to the instructions supplied with the optional bracket.
CAUTION
•This TV should be mounted on the wall only with the
•Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
•You can ask a qualifi ed service personnel about using an optional
•Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall | About setting the TV angle |
Vertical mounting | Angular mounting |
|
NOTE
•Detach the cable clamps on the rear of the TV when using the optional mount bracket.
•To use this TV mounted on a wall, fi rst remove the cover at the 4 locations on the rear of the TV, and then use the screws
68supplied with the wall mount bracket to secure the bracket to the rear of the TV.
6/26/09 4:26:27 PM
