Sharp LC-40LE700X PC audio select, Displaying a PC image on the screen, On the menu

Connecting a PC

PC audio select

When using the INPUT 7 terminal or INPUT 1 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input.

Selected item	Description
INPUT1(HDMI)	When connecting devices (including a PC) with DVI/HDMI cable to the INPUT 1 terminal and inputting
	analogue audio signals from the AUDIO (R/L) jack.
INPUT7(RGB)	When connecting a PC to the INPUT 7 terminal, and inputting analogue audio signals from the AUDIO
	(R/L) jack.

NOTE

•You must set this to “INPUT7(RGB)” when connecting devices (including a PC) with an HDMI-certifi ed cable to the INPUT 1 terminal. If “INPUT1(HDMI)” is set, there will be no sound output.

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size as illustrated below.	1	Press WIDE.
		• The WIDE MODE menu displays.
		WIDE MODE
		Normal
		Cinema
		Full
		Dot by Dot

(Example)

2	Press WIDE or a/b to select a desired item
	on the menu.

a

Screen size images.

Input Signal

1024g768

NOTE

•Connect the PC before making adjustments.

•Selectable screen size may vary with input signal type.

Normal Cinema Full Dot by Dot

Keeps the original	For viewing wide	An image fully fi lls the	Detects the resolution
aspect ratio in a full	screen programs. The	screen.	of the signal and
screen display.	top and bottom of		displays an image
	the image is slightly		with the same number
	cropped.		of pixels on the
			screen.

Input Signal

1360g768

Normal Full Dot by Dot

Keeps the original	An image fully fi lls the	Detects the resolution
aspect ratio in a full	screen.	of the signal and
screen display.		displays an image
		with the same number
		of pixels on the
		screen.

56

LC-40LE700X.indb 56

6/26/09 4:26:17 PM