Connecting a PC
Use the PC terminals to connect a PC.
HDMI Connection
HDMI cable (commercially available)
PC
DVI/HDMI conversion cable (commercially available)
3.5mm stereo minijack cable (commercially available)
INPUT 2 or INPUT 3
INPUT 1*
PC
*When using the INPUT 1 terminal, you must select the proper item in the “PC audio select” menu depending on the type of HDMI cable connected. (See page 56.)
NOTE
•The PC INPUT terminals are
•Refer to page 59 for a list of PC signals compatible with the TV.
Analogue Connection
PC
PC
3.5mm stereo minijack cable (commercially available)
RGB cable (commercially available)
INPUT 7*
3.5mm stereo minijack cable (commercially available)
RGB/DVI conversion cable (commercially available)
INPUT 7*
*When using the INPUT 7 terminal, you must select “INPUT7(RGB)” in the “PC audio select” menu. (See page 56.)
Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
Pin No. | Signal name | Pin No. | Signal name | Pin No. | Signal name |
| R |
| GND (Ground) |
| Not connected |
| G |
| GND (Ground) |
| SDA |
| B |
| GND (Ground) |
| HD |
| Not connected |
| +5V |
| VD |
| CSYNC |
| GND (Ground) |
| SCL |
NOTE
•Macintosh adaptor may be required for use for some Macintosh computers.
•Pin No. 5 is not used for inputting the signal.
55
6/26/09 4:26:16 PM
