Watching TV

Quick start

You can reduce the TV’s start-up time after turning on the power with the remote control unit.

1

Press MENU and the MENU screen displays.

 

2

Press c/d to select “Setup”.

 

3

Press a/b to select “Quick start”, and then

press ENTER.

 

4

Press c/d to select “On” or “Off”, and then

press ENTER.

 

Picture size settings

Selecting the Wide Screen Signalling (WSS) picture size automatically

WSS allows a television to switch automatically among the different screen formats.

Selected item

Description

 

 

On

The TV quickly starts up from standby,

 

19 W or more of power consumption is

 

required during standby.

 

 

Off

Power consumption is less than 1 W.

 

 

1

Press MENU and the MENU screen displays.

 

2

Press c/d to select “Setup”.

 

3

Press a/b to select “WSS”, and then press

ENTER.

 

4

Press c/d to select “On” or “Off”, and then

press ENTER.

 

NOTE

Try to set WIDE mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled.

Selecting the Wide Screen Signalling (WSS) picture size manually

The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

3

Press a/b to select “4:3 mode”, and then

press ENTER.

 

 

 

4

Press c/d to select “Panorama” or “Normal”,

and then press ENTER.

 

 

 

 

WSS signal 4:3 screen

4:3 mode “Panorama”

4:3 mode “Normal”

 

Selected item

Description

 

 

Panorama

Wide image without side bars

 

 

Normal

Normal range keeping 4:3 or 16:9 aspect

 

ratio

 

 

31

LC-40LE700X_en_d.indd 31

7/8/09 9:58:31 AM

Page 33
Image 33
Sharp LC-40LE700X Picture size settings, Watching TV Quick start, Press a/ b to select Quick start, and then