Preparation
Attaching the stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 | Confi rm the 8 screws supplied with the TV. | 3 | 1 Insert the stand into the openings on the |
|
|
| bottom of the TV. |
Short screws (g4)
(used in step 3)
Long screws (g4)
(used in step 2)
2 Insert and tighten the 4 short screws into the 4 holes on the rear of the TV.
Screw driver
(not supplied)
Short screw
2 | Attach the supporting post for the stand unit |
onto the base as shown below. | |
| Long screw |
| Screw |
| driver |
| (not supplied) |
Soft cushion
1
1
NOTE
• To detach the stand, perform the steps in reverse order.
6
6/26/09 4:25:31 PM
