Appendix

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1

Press MENU and the MENU screen displays.

 

9

The TV searches for, sort and stores all the

receivable TV stations according to their settings and

the connected antenna.

• To abort the initial auto installation in progress, press RETURN.

NOTE

When the TV is in STORE mode, repeat steps 1 to 7 to change to HOME mode.

2

Press c/d to select “Setup”.

 

 

 

 

 

 

3

Press a/b to select “Reset”, and then press

 

ENTER.

4

If you have already set the password, enter it

here.

 

 

“Return to factory pre-settings” displays on the

 

 

 

screen.

5

Press c/d to select “Yes”, and then press

ENTER.

 

 

“Now, TV will restart automatically. OK?” displays

 

 

 

on the screen.

6

Press c/d to select “Yes”, and then press

ENTER.

 

 

“Now initialising...” displays on the screen and

 

 

 

blinks.

 

After the reset has completed, the power shuts

 

 

 

off and then comes back on. The screen will have

 

 

 

returned to its original settings.

 

 

 

 

 

 

 

 

 

 

 

After factory presetting,

 

 

 

 

 

TV will restart automatically

 

 

 

 

 

 

 

 

 

 

 

 

Now initialising...

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

Press a/b to select the desired language

listed on the screen, and then press ENTER.

 

Press c/d to select HOME” or “STORE”, and

 

then press ENTER.

8

Press ENTER.

 

 

 

 

 

 

 

 

Major Analogue Channel settings are pre-set.

 

 

 

 

 

 

However if there are any channel(s) that you

 

 

 

cannot receive with the factory pre-sets, please

 

 

 

perform “Auto installation” in “Setup” section

 

 

 

(refer chapter “Watching TV” on manual).

Digital Search

Major analogue channel settings are pre-set. However if there are any channel(s) that you cannot receive with the factory pre-sets, please perform “Auto installation” in “Setup” section. (See page 20.)

Download setup

The TV automatically determines whether a new software version is available when the TV is in standby mode.

Selected item

Description

Yes

Automatically searches for new software

updates available when the TV is in

 

standby mode.

 

 

No

Does not search for update information.

 

 

Now

Checks if there is new software

immediately.

 

Downloading the software

You can select the method of update.

1If the software is updated, the confi rmation message “New download information has been detected.” appears

If the TV receives the update service while in standby mode, a confi rmation message displays after turning on the power.

2Follow the screen prompts.

Selected item

Description

 

 

 

Starts downloading immediately. It takes

 

approximately one hour to update. You

 

cannot carry out other operations while

Yes

downloading.

• Cancels the download by pressing

 

 

ENTER on the remote control unit

 

when “Discontinue” is displayed on the

 

screen during the update.

 

 

No

Starts downloading automatically several

minutes after entering standby mode.

 

 

 

NOTE

The TV must remain in standby mode for download. Do not turn off the power using POWER on the TV.

Updating the software may take some time.

Information

Message list

When a new broadcast station is detected, the message is updated in the “Message list” of the “Information” menu.

Receiver report

Display reports regarding failures and changes for timer settings.

Identification

You can check the current version of the software on the screen.

65

LC-40LE700X_en_h.indd 65

7/1/09 2:21:30 PM

Page 67
Image 67
Sharp LC-40LE700X operation manual Reset, Download setup, Information, Identification