Ricoh IS300e To recall destinations using a title, To recall all available destinations, 129

Selecting Destinations and a Subject

To recall destinations using a title

A Press the {./*} (Title) key.

List of titles appears on the screen.

Note

❒Titles are displayed accord-

ing to the settings in [Configu- ration] → [Basic Settings] → [Scanner] → [Select Title] on the Web Status Monitor.

B Use the {1} or {0} key to highlight the title you want to select, and then press [OK].

The destinations assigned to the selected title are displayed.

Note

❒You can select the title under which each of the registered

destinations is assigned in

[Configuration] → [E-mail Set- tings] → [E-mail Address] → [Assign Title] on the Web Sta- tus Monitor.

C Highlight the destination you want to select, and then press [Select].

Note

❒While highlighting a destina- tion with its check box select- ed, press [Clear] to clear the check box (this deselects the destination).

❒If you want to select from an- other title, press the {./*} (Ti- tle) key. This displays list of titles again.

To recall all available destinations

A Press the {./*} (Title) key.

List of titles appears on the screen.

B Use the {1} or {0} key to highlight [All], and then press [OK].

G When you are finished, press [Ex-

it].6

This returns to the screen that was displayed in step C.

Note

❒When no cc destination and subject is necessary, press [OK] here. The E-mail/Send File standby screen is displayed, and the first destination you have selected appears at the sec- ond line of the screen. When you have selected multiple des-

tinations, you can confirm them by using the {1} and {0} keys.

129