Ricoh IS300e operating instructions 133, Press Cancel or OK

Making Scan Settings

C Highlight the option you want to select by using the {1} or {0} key, and then press [OK].

Note

❒Pressing [Cancel] discards the selected option, and returns to the previous screen.

❒When you select “ Custom Resolution ” for [Resolution] and/or “ Custom Area Set- ting ” for [Scan Size], use the number keys to specify the values.

D Repeat steps B and C as nec- essary.

E When you are finished, press [PrevMenu].

This returns to the Scan Settings screen.

FPress [OK].

This returns to the E-mail/Send File standby screen, and the cur- rent scan settings are displayed on the third line of the screen.

Confirming the Scan Settings

You can confirm the current scan set- tings, or the scan settings that you have registered to [Default], [User 1], [User 2] or [User 3].

Note

❒You can confirm the [Default] set- tings by selecting [Manual] in step B below, unless you configure the scan settings manually. After you have manually configured the scan settings, selecting [Manual] displays the current settings.

A Press [Scan].

The Scan Settings screen is dis- played.

B Use the {1} or {0} key to high- light [Manual], [User 1], [User 2] or [User 3] on the screen, and then press [OK].

The status screen appears.

C Use [Next] and [Prev.] to display
the setting of the setup item you
	6
want to confirm.

D When you are finished, press [Ex- it].

E Press [Cancel] or [OK].

Note

❒If you want to apply the scan

settings you selected in step B, press [OK]. If you want to exit the status screen without chang- ing anything, press [Cancel].

This returns to the E-mail/Send

File standby screen.

133