Ricoh IS300e Placing the Originals, Precautions in placing an original in the ADF, 117

Original Orientation

Placing the Originals in the

ADF

The ADF allows you to place multiple originals at one time. Originals placed in the ADF can be scanned on one side or both sides.

❖Precautions in placing an original in the ADF

•For information about the origi- nals that cannot be placed in the ADF, see p.111 “Originals that cannot be set in the ADF”.

Important

❒Attempting to use unsuitable originals in the ADF can lead to a misfeed and damage to the originals. Place such orig- inals directly on the exposure glass.

•Do not set originals in the ADF in excess of the upper limit mark.

•See p.110 “The Original Sizes Available for Auto Detection” for information about the origi- nal sizes that can be detected automatically.

•Fan the originals to get air be- tween the sheets before setting in the ADF.

A Adjust the side guides to the size of your originals.

B Place the originals face up (when performing duplex scans, front page up), and align them.

For information about original orientation, see p.113 “Simplex Scanning” and p.114 “Duplex Scanning”

Note

❒If the scan width is the same, you can set originals whose length differs from each other.

❒The originals are scanned in se- quence, starting with the top page.

A When the original width is 297mm (11.7”) or less

4

ZEPY010J

BWhen the original width is wid- er than 297mm (11.7”)

ZEPY020J

Note

❒When both sides of an original are scanned, the original setting direction needs to be changed

regardless of the setting direc- tion. ⇒ p.114 “Duplex Scan- ning”

117