Ricoh IS300e To specify the resolution manually using Custom, To set a custom area

Configuring the Scanner Settings

To specify the resolution manually using [Custom

Resolution]

AWhile [Custom Resolution] is dis- played, press [Setting].

3	The setting screen for “ Custom
	Resolution ” appears.

BSpecify the resolution manual- ly by using the number keys.

Note

❒To correct the number, press the {Clear/Stop} key to clear the number you have en- tered.

CPress [OK].

This saves the setting you have entered, and returns to the De- fault Scan Settings menu.

Note

❒Pressing [Cancel] discards the values you have entered, and returns to the Default Scan Settings menu.

J Press [Next].

“3. Scan Size ” appears as the setup item currently selected.

K Press [OK].

L Select the Scan size.

•The option that is currently se- lected is displayed first.

•“*” mark appears along with the option currently selected.

•Use [↑] and [↓] to display the option you want to select.

To select a scan size from preset sizes

A While the preset scan size you want to select is displayed, press [OK].

This saves the setting you have selected, and returns to the De- fault Scan Settings menu.

Note

❒Pressing [Cancel] discards the selected option, and returns to the Default Scan Settings menu.

To set a custom area

A While the option “ Custom

Area Setting ” is displayed, press [Setting].

The setting screen for “ Custom Area Setting ” appears.

The setting screen for “3. Scan Size

”appears.

76