Ricoh IS300e Network Boot, DNS Server 1 IP Address, DNS Server 2 IP Address, Transmission Speed

Configuring the Scanner Settings

3

54

❖Network Boot

Use this item to select whether you use this machine on a DHCP envi- ronment or not. Set this item to “ NONE ” when a fixed IP address is assigned to this machine on the network you use. Set this item to “ DHCP ” when you use this ma- chine on a DHCP environment.

Note

❒If you plan to use delivery serv- er function, assign an IP address of this machine statistically, even when you use this ma- chine on a DHCP environment. You still have to select “ DHCP ” for [Network Boot], and do not enter any value to the following setup items: [IP Address], [Subnet Mask], [Default Gateway Address].

❒After you have changed the set- ting of this item, turn off the power and then back on to acti- vate the change.

❖DNS Server 1 IP Address

Specify the IP address of the pri- mary DNS server on the network you use this machine, in the form of xxx.xxx.xxx.xxx (xxx:0 through 255).

Note

❒This setting can only be config- ured using the Web Status Mon- itor.

❖DNS Server 2 IP Address

When a secondary DNS server runs on the network you use this machine, specify the IP address of the secondary DNS server in the form of xxx.xxx.xxx.xxx (xxx:0 through 255).

Note

❒This setting can only be config- ured using the Web Status Mon- itor.

❖DNS Server 3 IP Address

When a third DNS server runs on the network you use this machine, specify the IP address of the third DN S server in the form of xxx.xxx.xxx.xxx (xxx:0 through 255).

Note

❒This setting can only be config- ured using the Web Status Mon- itor.

❖Delivery Server IP Address

This item is automatically config- ured when you register this ma- chine to a delivery server operated by ScanRouter V2 Profession- al/Lite. Do not specify this item manually.

❖Transmission Speed

Use this item to select a network transmission speed from “Auto”, “100Mbps” or “10Mbps” when you connect this machine to a net- work using a cable.

❖LAN Type

Use this item to select the type of LAN from the following options.

•Ethernet

Select this option when you connect this machine to a net- work using a cable.

•IEEE 802.11b

Select this option when you connect this machine to a net- work using an optional wireless LAN card.

Note

❒After you have changed the set- ting of this item, turn off the power and then back on to acti- vate the change.