Ricoh IS300e operating instructions Installation environment

Setting Up the Scanner

❖Installation environment

Important

❒Do not set up the scanner in any of the following types of loca- tions. Doing so creates the risk of malfunction of the scanner.

	• In a location exposed to di-
2
	rect sunlight

•In a location where the scan- ner will be subjected to blow- ing air or radiant heat, such as near an air conditioner or heater

•In a location near other elec- tronic devices, such as a ra- dio or television set

•In a location subject to ex- treme temperatures or hu- midity

•Near a humidifier

Set up the scanner in a location where the temperature and hu- midity will fall within the ranges shown below.

Important

❒Save the box and cushioning mate- rial in which the scanner was packed so that they can be used if it is necessary to transport the scanner in the future.

❒When the machine is moved from a cold location to a warm location, sudden temperature changes cause condensation inside of the scanner. Wait one hour or more be- fore turning on the scanner to al- low the condensation to evaporate.

ADG022S

24