Ricoh IS300e operating instructions Scanner Settings, Twain Standby Time, Auto Reset Timer

Scanner Settings

Scanner Settings

This section describes the setup items contained in the Scanner Settings, and shows you how to configure the set- tings in the Send Scan Settings menu (which includes main setup items in the Scanner Settings) using the con- trol panel of this machine.

Information to Set in [System Settings]

❖1. Select Method

This item lets you select which of the functions of this machine has priority, when you use this ma- chine. You can select from the fol- lowing two options.

•TWAIN

With this option, the Network TWAIN standby screen is dis- played as the Send Scan initial screen. This means that the ma- chine stands by for receiving a scanning command from a cli- ent computer. While the Net- work TWAIN standby screen is displayed, press [Exit] to use the Delivery Server function or the Send Mail/Send File function (except for performing a Cus- tom File Send operation).

•Send File

With this option, the Delivery Server standby screen or the E- mail/Send File standby screen is displayed as the Send Scan in- itial screen. While either of these screens is displayed, you can use this machine as a network TWAIN scanner or perform a Custom File Send operation from a client computer, when- ever no operation is performed on this machine.

Note

❒When you set “7. Select Method ” to “ TWAIN ”, this setup item is dimmed and cannot be con- figured.

❖TWAIN Standby Time

This item lets you specify the time

after which this machine stands by 3 for a network TWAIN command

(or a [Enter Custom Send File] com- mand), from the last operation of the control panel of this machine. When you set this item to “Off”, this machine always stands by for these commands. When you set this item to “ On ”, you can set the time within the range of 3 to 30 sec- onds in 1-second increments.

Note

❒When this machine receives a network TWAIN command (or a [Enter Custom Send File] com- mand) before the specified TWAIN standby time goes by, the message “ Unable to make configurations because Scanner is currently in use. Please try again lat- er. ” appears on the client com- puter.

❖Auto Reset Timer

This item lets you select whether to return to the state immediately af- ter power-on when this machine is not used for the specified time pe- riod. When you set this item to “ Off ”, the screen currently dis- played remains until another oper- ation is performed or the power is turned off. When you set this item to “ On ”, you can set the time within the range of 10 to 999 sec- onds in 1-second increments.

59