Ricoh IS300e operating instructions Attaching the Control Panel Unit to the Scanner Unit

Attaching the Control Panel Unit to the Scanner Unit

Attaching the Control Panel Unit to the Scanner Unit

Note

❒Use the tool that comes with this machine when you tighten or loos- en the screws.

A Insert the plug of the control pan- el unit into the socket on the scan- ner unit, as illustrated below.

ABK011S

Important

❒While making sure that the plug is facing in the correct direction, inset the plug as far as it goes into the socket. It may be a bit tight to insert the plug into the socket, so push the plug with a strength that is enough for in- serting it in place.

Note

❒To avoid the plug being insert- ed in the wrong direction, the socket has a number of tiny prongs inside of it. When you insert the plug into the socket, make sure that the socket is fac- ing in the correct direction. In- serting in the wrong direction creates the risk of damage to the plug and the socket.

❒Be careful not to pinch the cable when you attach the control panel unit to the scanner unit.

❒Locating the scanner unit at an end of a desk makes it easy to attach the control panel unit.

B Insert the hooks of the control 2 panel unit to the scanner unit.

ZDLp330

C Secure the control panel unit us- ing the screw that comes with this machine.

ZDLp340

Note

❒Do not open the cover located at the lower left of the control pan- el. Changing configuration of the switches inside of the cover could cause this machine to stop operating normally.

25