Ricoh IS300e operating instructions Settings for Print Scan in duplex scanning, 115

				Original Orientation
Original width	297mm (11.7”) or less		wider than 297mm (11.7”)
Settings for Send Scan	Select [	: 2 Sided: Top to	Select [	: 2 Sided: Top to
(Use [Original Settings] in	Top].		Top].
[Print Settings] )

When the original is bound at	When the original is bound at the
the top:	top:

Setting when the net-	Set [Orientation:] to		, [Side:]	Set [Orientation:] to		, [Side:] to
work TWAIN driver is	to “ Duplex (Top to Bottom) ”,			“ Duplex (Top to Bottom) ”, and
used	and [Document:] to “ ADF ”.			[Document:] to “ ADF ”.
Settings for Send Scan	[	: 2 Sided: Top to Bottom]		[	: 2 Sided: Top to Bottom ]
(Use [Original Settings] in	[2 Sided:TtoB].			[2 Sided:TtoB].
[Print Settings] )

Settings for Print Scan in duplex scanning

•When you perform a Print Scan operation while scanning both sides of orig- inals, set the originals in the ADF as illustrated below, regardless of the width of the originals.

ADG025S

•Select (2 Sided Orig. → 1 Sided Print) or (2 Sided Orig. → 2 Sided Print) to per- form duplex scanning, by using [Duplex] under [5.Print Settings] on this ma- chine. See p.79 “Duplex” for details.

Limitation

❒When you select duplex scanning in a Print Scan operation, scanning of the originals is fixed to top to top. This means that the originals must be bound on either side.

❒When you select 2-sided print, the printout orientation is fixed to top to top.

❒When the originals are bound at the top, or when you do not set the origi- nals as illustrated above, you’ll never have the printout results as expected.

4

115